[How is it used?
When a heavy load (box + tandem, etc.) is placed on the rear carrier, the side stand alone will not allow the front to move up, and the front will not allow the rear to move down.
Introduced as an auxiliary STAND because the vehicle body collapses as it is.
Was the one you received as per Image?
The product is quite gussied up and seems to be stronger than OEMSTAND.
Was the installation difficult?
It is easy to use, as it is just a matter of tightening it to the Tandem Footpeg, but it is not a dedicated product.
Interference countermeasures (Washer, body shaving, etc.) in actual product matching.
Bolt selection appropriate for strength (I use HondaOEM 8*34Socket Bolt 90112MBRJ10)
is required
How was your experience with it?
I am satisfied because the stability has been improved as expected and there is no sign of front up and tipping over even with luggage loaded on it.
Of course, there is no side stands switch, so care must be taken not to leave it out while driving.
[Included Parts:were they on?
It came with Bolt and Washers, but I did not use any of them.
(Washer with brim, Bolt, etc. as described above are prepared separately.)
[Was there anything that disappointed you?
There are considerable spatter marks and the visual quality is not flattering.
It's not a place to look seriously, so I personally don't mind it too much.
- Instock
41.1 EUR (7,098 JPY) 50.96 EUR Save 19%
Lieferinformationen
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
Product detail
Name des Fahrzeugherstellers : Honda : C-50,C-90/Yamaha : V-50,V-80
NEW POWERSTAND II U-CLAMP PIPE,OWAN-Verbesserung/Super Cub 100/Presse Cub 50/News Mate
**Bei einigen Modellen muss die Motorhaube möglicherweise geschnitten werden.
*Für die Autos, die geschnitten werden müssen, ist im Bausatz eine Säge enthalten.
*TowneMate kann nicht installiert werden..
* Das Bild ist nur als Referenz. Das gezeigte Bild kann vom tatsächlichen Produkt abweichen.
Verbessertes U-Schellenrohr
Super Cub 100 und Press Cub 50 können nicht installiert werden.
Kann nicht an den Town Mate oder News Mate angehängt werden.
Alle notwendigen Stege, Schrauben und Anleitungen sind in diesem Bausatz enthalten..
Je nach Fahrzeug muss die Motorhaube eventuell durchtrennt werden..
Vorsicht
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Kundenbewertungen
Reviews with image
Fits:YAMAHA V-50 , HONDA C-50 , HONDA C-90 , YAMAHA V-80
Mar 20, 2022
CT125 as a fall-back option to CT125.
Fits:YAMAHA V-50 , HONDA C-50 , HONDA C-90 , YAMAHA V-80
Jan 4, 2022
I installed it on my ct125. I installed it together with the Tandem Footpeg, but I had to shave a part of the STAND side because it interfered and the hole was gapped. The Rubber at the end is just right for Home center.
Also, it's important to note that there is no STANDSensor for the retrofit, so be careful not to forget to put it away.
Fits:YAMAHA V-50 , HONDA C-50 , HONDA C-90 , YAMAHA V-80
Jul 4, 2013
It is attachment at C90DS.
It is carrying out very well firmly, and if attachment also reads a description, it will be made to the
instant.< -- it is likely to br > attach and the seen touch seems to be strong.The STAND of the
CUB PRESS is resembled.
Fits:HONDA Helmet in TACT(AF-16) FLUMARK
Feb 18, 2024
Perfect bolt-on side stand for SA50 Elite
This side stand is a perfect bolt-on solution to get rid of the center stand on your SA50 elite. The perfect side stand if you don't own a welder as it feels solid / secure when mounted.
View Detail
Fits:HONDA Eve(AF-06) Common to Eve Smile
Feb 18, 2024
Perfect bolt-on side stand for NQ50 Spree
This side stand was easy to mount, and fit perfectly! It is exactly what you need if you AF-16 swap your honda spree!
View DetailNew Custom Articles
