I had to remove the exhaust system when I replaced the tire on the Scooter, so I prepared a new one.
You don't actually have to replace the Gasket with a new one every time, but I try to replace it with a new Gasket about once every three times.
This is a small ring shaped part, but if it gets crushed and can't be sealed, the exhaust will leak and become noisy, and the power will also drop.
Remove the old gasket by hooking it with a slotted screwdriver or the like because the old gasket is usually crushed and attached to the cylinder head side.
When you install the exhaust system, the new gasket will fall off and it will be annoying. I put grease on one side of the gasket and put it on the cylinder head.
This is not OEM Parts, but KITACOBrand. However, the quality and specification of the product are fine and can be used as OEM Parts.
I've been using KITACO's Exhaust Gasket for decades since I was young.
1pc. in the tool box, I think it is good to have it as a spare.
- Instock
2.04 EUR (352 JPY)
Lieferinformationen
In Stock : 4 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
Byte AF59 All models
Number of uses X1
-
BENLY50 AA03 All models
Number of uses X1
-
TODAY AF61
All years used X1
-
TODAY(FI Vehicles) AF67
All years used X1
Alles sehen
HONDA
Product detail
[Typ]H-17
Menge]1Stck.
* Das Bild ist nur als Referenz. Das gezeigte Bild kann vom tatsächlichen Produkt abweichen.
Notwendigkeit des Austauschs und der Wartung von Schalldämpfern!
Die Schalldämpferdichtung ist ein nicht wiederverwendbares Verbrauchsteil, das nach Gebrauch zerkleinert wird..
Wird es wiederverwendet, kann es zu Abgasleckagen führen und es unmöglich machen, seine ursprüngliche Leistung zu erreichen..
Es wird empfohlen, die Dichtung beim Aus- und Einbau des Schalldämpfers durch eine neue zu ersetzen..
Eine Vielzahl von Produkten, die mit vier einheimischen Herstellern kompatibel sind!
Vorsicht
* If there may be an instruction manual included, it will be written in Japanese.