- Used to LED the Blinker on gsx-8s.However, since I removed the tank for the wiring of the Grip heater and ETC, I thought it would be easier to replace the Relay under the tank on the gsx-8s. I thought...Weiterlesen
- [How is it used?When we switched our Blinker to LED, Relay also needed to support LEDs, so we purchased this product.Was the one you received as per Image?The shape was exactly as shown in the Image.W...Weiterlesen
- GSX250R (2017) for BlinkerLED, we did not want to use Cement resistors, so we used this one.If #OEM is non-LED, the LED Blinker consumes less power (less current at the same voltage) than a light bulb...Weiterlesen
- Used in combination with LED Bulb.It was easy to install, no modification required.Weiterlesen
- Easy operation by simply connecting CouplerHowever,To get to the vehicle Blinker Relay.It was Large strange.It depends on the type of car.Weiterlesen
- I installed this product to replace the BlinkerLED on my Yamaha MT-07. I have used this product for about 6 years without any problem and I am satisfied with it.Weiterlesen
- I installed it at the same time when I changed the Blinker bulb of 12VDAX to LED.The Normal valve was 12V10W and the LED Bulb was 12V3W.This product clearly states that it is compatible with 1W and up...Weiterlesen
- I would like to use a Grip heater in my Grom, but the amount of power it generates is too high, so I'm going to change all the lights to LED.If you use a resistor to prevent high flasher to reduce pow...Weiterlesen
- [How is it used?I used it on my MainMotorcycle XJR1300C.Was the one you received as per Image?It was a little different from Image, in a good way. ICRelay has been using DAYTONA products for a long ti...Weiterlesen
- The Relay was acting up, so I replaced it.So far it's working fine and I'm relieved that there are no problems.I still feel more comfortable using the Large Hand Brand stuff.Weiterlesen
- Motivation for purchaseUsed in CB400SF (NC42)Purchased to install a flowing LED blinker.When I used the OEM Relay, it became a high flasher and I used the LED-compatible Relay.The Connector makes it h...Weiterlesen
- Купил светодиодное реле от 1 до 100 ватт с этой деталью на мотоцикле хонда-манки мигает и обычная лампочка мигалки и светодиодная лампочка очень хорошее универсальное реле мигалки на 12 вольт мотоцик...Weiterlesen
- i'm using it with gsx1100sHazard also works fine with the change to ledIt's a little expensive, but the price is worth the performanceWeiterlesen
- Purchased because the CJ750 blinker was transferred to the SR400FI Originally a Wise GEAR shell blinker was installed, and the blinker for 15w It was a relay, but the CJ750's Blinker was a 23/8w Doubl...Weiterlesen
- I used it on my ZEPHYR750-C2The normal relay is slow to respond, and it is one of the most important things after putting in the blinker switch TEMPO13It starts flashing after a pause, which I didn't ...Weiterlesen
- OEMRelay and DAYTONARelay's Coupler,Insertion shape is different. be careful.Please connect using a flat Bullet Terminal etc..after,"Kachin, Kachin"I do not do an operating sound. Flashe...Weiterlesen
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING