About quality and texture - The round taper type air filter from K&N is made from a multi-layered cotton gauze filter with a rubber base and metal top, the quality from the overall fit and finish is perfect.About the feeling of use - Perfect sized air filter for those custom air filter installations or even fitting directly onto the throttle body if the space allows. A one off purchase for an air filter that wil last the life of the motorcycle, during my ownership anyway.Products to buy together - Another product to purchase when looking to further increase the performance on the Grom would be a lightweight flywheel, which allows for an increased throttle response.Difficulty of installation - The installation of the round taper type air filter is a simple task that took 0.7 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to gain aceess, remove the original air intake and secure the round taper type air filter to the new larger inlet tube.Cost performance and comparison with other products - I find the cost of all the products K&N sell to be high when compared to what most other companies sell their products for and the round taper type air filter is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the round taper type air filter, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

This GSX650F came in for a service which included air filter, oil filter and oil change. I decided to go for the K&N filter over the OEM one because you also have the ability to wash, re-oil and re-use these filters. I have never found them to be anything less than the quality of the standard OEM filters and do not have any less performance. As I said, these are reusable if you do it all correctly. This is replacing the OEM Suzuki one which came on the bike when the customer dropped it off. By the looks of it, it has rarely been changed. I dispair how some people manage to run bikes without the slightest notion of maintenance. Finding the correct filter for this bike was easy too, I checked on Webike website and this showed the models that fit each filter. Really easy. I had other items in my order and this then cut down the shipping over the entire order. I use EMS fast service which arrived at my door in 5 days. All the items were packaged really well and bubble wrap and air pockets were used to fill any space in the box. Webike even tape the outer box on all sides so nothing can get in or out. The filter arrived in perfect condition and did come pre-oiled which is also nice so you do not have to mess around the first time. Fitted in about half an hour total. The final result was perfect. A nice clean well oiled air filter ready for a few thousand miles to come. Thanks to Webike for doing a great job and providing a great service throughout. View Detail

We wanted to try the new K&N filter for this bike over the OEM one becasue you also have the ability to wash, re-oil and re-use these filters. I have never found them to be anything less than the quality of the standard OEM filters and do not have any less performance. As I said, these are reusable if you do it all correctly. This is replacing the OEM Suzuki one which came on the bike standard. Finding the correct filter for the bike was easy too, I checked on Webike website and this showed the models that fit each filter. Super easy.I had other items in my order and this then cut down the shipping over the entire order. I use EMS fast service which arrived at my door in 5 days but there was a weekend inbetween. All the items were packaged really well and bubble wrap and air pockets were used to fill any space in the box. Webike even tape the outer box on all sides so nothing can get in out. The filter arrived in perfect condition and fitted as I mentioned above in about half an hour total and that was including cleaning the surfaces and prepping everything. The final result was great, all sorted and no leaks. If you do it right the first time, follow the instructions this won't happen anyway. Very pleased with my order, a big thanks to Webike for doing a great job and providing a great service throughout.View Detail

For the high performance and upgrade the air flow with an afternarket exhaust system i choose this one as the best brand in this segment, fitted on my 2019 Honda CB1100RS like the genuine one and make the flow and response better, ofcourse beside the best price and trusty service from webike japanView Detail

Install K&N replacement air filter on my bike. Its provide better air flow and washable. In long run, save money than keep replacing stock air filter. Highly recommend to others, especially if you want to change to full exhaust system. View Detail

This was another part that was needed for the CB1000R that came in. This was in need of a new o-ring for the right side crank case cover that was also being changed. It just makes sense to change the o-ring too as the old one was not great. I did not know the history of this bike and with checking the old o-ring, it certainly needed a new one. I found the right o-ring by using the tools Webike provide on their help section and then cross referencing with Honda schematics for my own peace of mind. I did have a couple of other parts I needed to order so I just got them all at the same time. My preferred courier is EMS as they just get the orders to me fast and efficiently. In 5 days from being shipped the order arrived. Everything was well packaged and no damage at all. Even the smaller parts were packed in bubble wrap for safety. This o-ring was inside the standard Honda packet and was in perfect condition. The quality is brilliant. It is a nicely made o-ring and there were no extra bits of rubber attached like you get with some after market brands. I double checked the diameter and it was exactly as it should be. I wipe a little oil on the o-ring in this section as it helps to stop from pinching or breaking the new o-ring upon install. Once fitted, there is a nice tight seal with zero leaks, even after a steady warm up. Great purchase, very happy customer. Thank you Webike. View Detail

The bike had recently been in a little accident and there were a few parts that had been damaged. One of these that was damaged was the rear wheel speed sensor which caused a lot of error codes and other issues. These sensors are quite prone to damage in the event of anything hitting the rear wheel. Anyway, a new one was needed and rather than use the local Yamaha dealer which charges as extortion amount, I decided to order directly from Webike. Finding the right part was not a big deal as you just need to search the Yamaha schematics for this model and year. There was however a superseded part so clearly an improvement from the original factory one when the bike was manufactured. Good news. The price from Webike was a lot better than the local dealer and along with a couple of other parts to fix this bike, I got them all shipped together. The price including shipping was excellent value for money which everyone needs these days. In as little as 5 days the order arrived. I was a little surprised at how big the Yamaha box was but when I checked, they had made sure that the sensor was kept in a nice straight line with no really sharp curves. Obviously, I was pleased to see this as I was just expecting a small box with the wire wrapped up in a tight ball. The quality of the wheel speed sensor is brilliant. There were no sharp edges on any of the plastic parts and the single wired parts were well protected within the rubberised sleeve. Fitting is straight forward, just unbolt the old and install in less that 20 minutes. Now there are no error codes and no other issues associated with the rear wheel speed sensor. One very happy customer. Thanks Webike. View Detail

This was a part that needed changing on the YS125 bike that came in for a service. The air filter was pretty bad and very dirty which was only having a negative effect on the bike's running. The correct air filter was easy to find using the tools and help section on Webike pages. I also cross referenced with Yamaha schematics for my own peace of mind. The air filter was really good value and slightly cheaper than I could source locally at my nearest Yamaha parts dealer. I chose EMS for my courier as they just get my orders delivered fast. 5 days from shipping my order arrived. Everything in the order was extra well packed with bubble wrap for security. The air filter is not a massive one especially for such a small bike but you do need it to fit as it should. The old one had gotten a little funny shaped and was not sitting right. This one however, fits perfectly. The air filter came in the usual Yamaha packaging. The quality is yet to be found, once started up and run for a while. Initial testing though seems as though the filter is allowing the right amount of air through. Good signs there. Fitting was easy, the filter is not doing what it is supposed to do and the bike does sound better for it. Brilliant work Webike. Happy customer. View Detail

A few parts needed replacing on this bike due to corrosion of bad salty weather. This plug pin and the actual hanger pin were not great. We decided to just get both of the parts and replace as just replacing one was a little silly. The plug pin was not hard to find as I had Honda schematics to check on. After finding the 2 parts needed on Webike website, I ordered these along with a couple of other bits. This saved on shipping and also meant that all the parts I needed, would arrive at the same time. This allows me to get on with the jobs together instead of having to wait for another shipment. The plug pin arrived and was inside a bubble wrap envelope that Webike warehouse had made. This kept both the plug pin and the hanger pin together for safety and so they would not get lost. The plug pin is essentially a grub screw which protect the hanger pin head from getting messed up. Unfortunately, someone had this plug pin out before and had not seated it correctly which meant salt and other road debris had made it's way inside. These things happen. The plug pin is well machined and even though it is a tiny part, Honda took the time to make it right. It went straight into the hanger pin with no fuss and now I am confident that this is protected going forward. Thanks you Webike. View Detail

During some maintenance I found a faulty washer plate and as my mind was not happy with this, I wanted to change it. Even though this is only a small a washer, it is worth the effort in fixing if you can get the parts for it. Yamaha schematics meant I found the right washer for this job and direct from Yamaha too. The price was pretty much the same as locally but as I was already ordering from Webike, why not get everything shipped at the same time. This saves a little on shipping costs and means I get the parts when I need them all. They got my order delivered in 5 days from being shipped which worked out perfectly for me. The washer came in the standard Yamaha packet along with the other parts I needed. The washer itself is a excellent quality item, it is precise with the parameters and there are no extra shards or swarf attached to it. The surface is smooth and flat as needed. Fitting is straight forward and a little grease helps too if you remember. Very pleased with my Yamaha purchase from Webike. Thanks. View Detail