klar
Material : Polycarbonat(Dicke: 3mm)
Größe. : Höhe 380 mm x Breite 340 mm
[Inhalt festlegen]
Bildschirm X1
1 Schwamm x 1 Blatt
Doppelseitiges Klebeband x 1
Senkkopfschrauben (M6X25mm) x 2
Senkkopfschrauben (M6X20mm) x 2
4 x U-Muttern
4 Unterlegscheiben x 4 Stck.
Rosettenscheibe x4
Kissengummi (2 mm dick) x 2 Stück
Gummi-Abstandhalter (dreidimensionaler Gummi) x 2 Stck.
*Das Bild dient nur als Referenz.
*Die Montagehalterung ist separat erhältlich.
*CB1100 RS (SC65) 17: Erfordert die Teilenummern 61380 und 92322 separat.
*Die Stege für die in der obigen Tabelle aufgeführten Modelle sind die gleichen wie die für die konventionelle Druckluftsperre und den Aerovisor. (Es ist möglich, Blast Barrier X an Fahrzeugen mit Blast Barrier und Aerovisor zu installieren, ohne die Streben zu verändern).
*Die Halterung und der Bildschirm müssen vorübergehend montiert werden, bevor Sie den Bildschirm am Fahrzeug anbringen. (Sie müssen aufpassen, dass Sie den Schirm nicht durch ein Überdrehen beschädigen, wenn Sie den Schirm festziehen und bleiben. Achten Sie auch darauf, den Bildschirm und den Steg nicht durch Überdrehen zu beschädigen.
*Verwenden Sie keine lösungsmittelhaltigen Reiniger oder wasserabweisenden Mittel, da diese die Oberfläche des Bildschirms beschädigen und zu Rissen führen können.
*Sprengsperren, Garnierung Gesicht (71540-71545) sind nicht verfügbar.
*Ein Satz Kinderteile ist im Bausatz enthalten, der für die Montage des Stegs an der Karosserie erforderlich ist (separat erhältlich).
Clear
Material: Polycarbonate (Thickness 3mm)
Size: Length 380mm x width 340mm
[Set components]
・Windshield x 1
・Sponge x 1
・Double-sided tape x 1pc
・Flat Cap Screw (M6 x 25mm) x 2pcs.
・Flat Cap Screw (M6 x 20mm) x 2pcs.
・U Nut x 4pcs.
・Flat Washer x 4pcs.
・Rosette Washer x 4pcs.
・Cushion rubber (2mm thickness) x 2pcs.
・Rubber spacer (three-dimensional rubber) x 2pcs.
*Approx. fitment for CB650R 2021 model (CB650RAM J 2BL-RH03).Must be installed with the model specific installation bracket (99238).
*Installation image is for reference only.
*Mounting brackets are sold separately.
*CB1100 RS (SC65) 17: Part numbers 61380 and 92322 are required.
*The bracket for installation is the same specification as the conventional Blast Barrier & Aero Visor for the models listed in the compatibility chart on the right.(It will not interfere with Blast Barrier or Aero Visor and no need to change the bracket.)
*When installing, temporarily assemble the bracket and windshield so that no stress is applied to any part of the windshield when it is mounted on the bike.(Also, be careful not to over-torque the windshield and bracket when tightening them to avoid damage.A lock nut is used to prevent the nut from loosening.
*Do not use cleaners or water repellents containing solvents, as they may damage the surface of the windshield or cause it to crack.
*Blast barrier and garnish face (71540-71545) cannot be installed.
*This product comes with a set of child parts necessary for attaching the optional vehicle specific bracket to the vehicle body.
*There may be changes in product specifications due to the manufacturer's reasons.