[Größe]
Breite : Ungefähr 760 mm
Länge : Ungefähr 500 mm
Höhe : Ungefähr 520 mm
[Material]
FRP
Inhalt
Haubenkörper, Stegsatz, Schirm, Schirmschraubensatz
*Bitte überprüfen Sie vor dem Kauf unbedingt die Vorsichtsmaßnahmen.
*Die Leuchte verwendet "7-Zoll-Projektor-LED-Scheinwerfereinheit" und die gleiche Art von Leuchteinheit.
*Diese Haube ist ein universelles Produkt, das in fremden Ländern hergestellt wird. Bitte stellen Sie sicher, dass Sie die folgenden Informationen lesen und verstehen, bevor Sie kaufen.
*Es gibt einen Fall, in dem die Leuchteinheit und die Haube miteinander in Kontakt kommen. In diesem Fall müssen Sie den Interferenzpunkt der Haube entfernen.
*Die Haube kann mit der Gabel in Kontakt kommen.
*Andere Teile, die stören, müssen abgeschnitten oder beschnitten werden.
*Für die Leuchteinheit (separat erhältlich) müssen Sie aus dem Hauptkabelbaum einen Verlängerungskabelbaum anfertigen.
*Je nach Position der Haube ist es möglich, dass das Loch zwischen dem Steg und der Haube nicht ausgerichtet ist. In diesem Fall müssen Sie das Loch der Haube aufweiten.
*In diesem Fall müssen Sie den Schirm und das Loch der Motorhaube mit der Bohrlochmutter befestigen und den nicht passenden Teil durch Schleifen aufweiten.
*Je nach Los gibt es einige Lose, die auf der Seite der Haube kein Loch für den Bildschirm haben. In diesem Fall müssen Sie die Löcher so bohren, dass sie auf den Bildschirm passen.
*Andere als die hier aufgeführten Fragen können wir nicht beantworten.
*Wir akzeptieren keine Rückgabe des Produkts, wenn es nicht installiert werden kann, weil es sich um ein zu verarbeitendes Produkt handelt.
*Bitte verarbeiten und installieren Sie das Produkt vor dem Lackieren. Wir akzeptieren keine Ansprüche nach dem Malen.
*Bitte beachten Sie, dass sich die Produktspezifikationen aus Gründen der Bequemlichkeit des Herstellers ändern können. Bitte haben Sie Verständnis.
[Size]
Width: Approx. 760mm
Front and rear length: Approx. 500mm
Height: Approx. 520mm
[Material]
FRP
Components
Cowl body, bracket set, windshield, windshield screw set
*Please make sure to read the notes before purchasing.
*7 inch projector LED headlight unit and the same type of light unit are used for the lights.
*Because this cowl is a universal product made non Japanese, it may have some scratches and scuffs, and the holes may not fit, so some modification is required for installation.Please make sure you understand the following information before purchasing.
*The light unit and cowl may interfere with each other, in which case it is necessary to shave the interfering part of the cowl.
*There is a case that the fork and the cowl interfere with each other, check the range of movement of both sides and if it interferes, it is necessary to shave the cowl.
*Other interfering parts need to be cut or shaved.
*For light units sold separately, it is necessary to make an extension harness from the main harness.
*Depending on the positioning of the cowl, the hole between the bracket and the cowl may be misaligned.To do this, you will need to widen the hole in the cowl.
*In some cases, the holes of the windshield and the cowl do not match, in that case, you need to fix the windshield with the well nut from the center hole of the cowl to the outside, and widen the holes with a file in order.
*Depending on the lot, some of them do not have the hole for the windshield on the cowl side.In this case, please drill the holes in order to match the windshield.
We will not provide information about processing methods other than those mentioned here, so please verify according to your actual bike.
*Any returns will not be accepted due to inability to install the product.
*Please be sure to process and install before painting.Any claims after painting are not accepted.
*There may be changes in product specifications due to the manufacturer's reasons.