besonderer Chef
Product # JT-116A-19
37.34 EUR (6,113 JPY)
List price: 37.34 EUR Save 0%
+61 Webike Punkt (0.37 EUR)
Product # JT-116A-19
37.34 EUR (6,113 JPY)
List price: 37.34 EUR Save 0%
+61 Webike Punkt (0.37 EUR)
Model Page Links
3.5 / 5
4 Bewertungen
Fits: KAWASAKI Z125 , HONDA glom , HONDA , KAWASAKI
[How is it used?
Used on HONDA GROM JC92.
We are using it attached to J-TRIP's Front stand, but the STAND we are using is Mini stand Not STAND, but STAND in normal Size.
I do not think this is the way it was originally intended to be used, but the installation itself is possible.
Was the one you received as per Image?
Yes.
There were some areas that were not anodized, but we believe that these were areas that came into contact with the hanging strings during anodizing.
However, I was not bothered by it because it is a part that is used to GunGun with the car body in the first place, and it is expected that the Anodized will surely peel off sooner or later.
I would probably be happier if they were more rugged and a little less expensive.
How was your experience with it?
Can also be used with JC92.
I have included a photo, but it is exquisitely designed to avoid horn Horn, etc.
The quintessence is an exclusive product.
I used it to remove the Front fork and it worked normally.
However, if the Mini stand is not used, it will be Lifted up quite a bit.
Rear stands are also not recommended, as I think they are quite dangerous unless you use one that rises reasonably high.
It makes sense that a product called Mini stand is properly prepared.
[Points to note]
Type of STAND to be used.
Note that if the Mini stand is not used, the Lift up height will be great.
Also, if Mini stand is not used, it is a little difficult to insert the Adapter into the Stem hole first.
Fortunately, the GROM is a lightweight vehicle, so we lifted the body of the vehicle by hand and forced it in.
How did it compare to other products?
No comparable product as it is an exclusive product.View Detail
Fits: KAWASAKI Z125 , HONDA glom , HONDA , KAWASAKI
[How is it used?
I purchased this product because I needed it for front maintenance of my Grom JC92.
Was the one you received as per Image?
The color was as I imagined, but the color was only Gold (Black at the time of sale?), so I thought it would be better to replace it...
Was the installation difficult?
No problem, just plug it in.
How was your experience with it?
This is a special product and can be easily lifted up by simply inserting it into the round hole at the bottom of the Stem. However, it is recommended to check the hole when inserting it to avoid hitting the Special Knife boss on the body....
[Included Parts:were they on?
No, sir.
[Was there anything that disappointed you?
The construction of the product is perfect, but I feel that the price is not commensurate with the quality.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I've been wondering whether I should buy a JT-113 or a JT-116 since I bought my first Grom, but I decided to go with the JT-113 because I have a JT-116 that I've been using for a while. The JT-113 is fine for maintenance around the wheel and brake, but for overhauling the front fork, the JT-116 and the SPECIAL Knife boss are better, so I decided to use this one. Also, I think the price is still too high.... If the price was at least 3,000 yen, I think everyone would buy the Grom Owner without hesitation, but what do you think? Also, if there were more color choices, it would be more enjoyable.View Detail
Fits: KAWASAKI Z125 , HONDA glom , HONDA , KAWASAKI
The front stand of the jTrip that I used until now was used without a problem, but when I started to lift the jc92 glom, the headlight collided with it and it was impossible. If I detach the headlight, I can use it, but it's too much trouble with Visor on. I thought about making my own, but it was not worth the materials and processing time, so I bought it, although the gold price is high. Easy to use
The problem was solved without any glitches. Parenthesis is nice with Gold alumite again!View Detail
Fits: KAWASAKI Z125 , HONDA glom , HONDA , KAWASAKI
There doesn't seem to be a STAND that can front up without interfering with Cowletc. in KATANA.
I was introduced to it when I took a peek at the Commander's FB page, so I thought I'd buy it before it was gone...
At that time, Webike didn't have it, so I bought it from another shop.
The installation is not a problem at all, but I don't know if it is individual difference or the hole under the Stem of front 16in. second type KATANA is larger than other vehicles, but with 19mm diameter, it feels like a governor.
He's got a long neck, he's a governor, and he's on the Commander's FB. "Attachment causes Lever to take effect, so riding with STAND-UP, for example... I don't want to overload it because I was warned that I would have to.
In the picture that has been introduced is Black, but the goods that have arrived are per Large? Is it Gold.
It was a shame that it was scratched a little, but it will be scratched with use, so I gave it a finish.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
Bitte wählen Sie Option, bevor in den Warenkorb legen.
Kundendienst
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.