Die Leistung der CB250R wurde gründlich getestet und entwickelt, um die Vorteile ihrer Eigenschaften zu nutzen..
Das Konzept dieses Produkts ist es, ein visuelles und kraftvolles Gefühl zu vermitteln, das durch einen Slipper nicht erreicht werden kann..
Diesmal haben wir ein Kammerrohr in der Mitte des Mittelrohrs gewählt, das das überwältigende Kraftgefühl beibehält und das unangenehme Geräusch des einteiligen Berstgeräuschs bei Vollgas reduziert, für eine "schnelle und komfortable" Fahrt..
Mit dem verbesserten Leistungsverhalten kickt er von niedriger Geschwindigkeit auf hohe Geschwindigkeit mit nicht weniger Leistung als normal, und das Leistungsgefühl unterscheidet sich im hohen Drehzahlbereich deutlich vom Normalen..
Die Tonqualität ist so optimiert, dass Sie den komfortablen Klang nicht nur in der Stadt, sondern auch auf Reisen genießen können..
Was das Visuelle betrifft, "wird es weiterhin semipermanent in seiner Brillanz erstrahlen" o. M. J. High-End-Spezifikationen mit N-Beschichtung..
Sie können sich an der "Textur, die sich im Laufe der Zeit nicht verändert" erfreuen, die das Fortschreiten der durch die Abgaswärme verursachten Korrosion verhindert, für immer..
Bei der Entwicklung des Schalldämpfers für CB250R (2BK-MC52) handelt es sich nicht um einen Slip-on, sondern um einen Vollauspuff..
Und hier ist der Grund dafür....
Die serienmäßige CB250R hat einen schwarz lackierten Auspuff, und sie sieht nicht gut aus oder fühlt sich seltsam an, wenn sie durch einen Slip-on ersetzt wird.. Wir haben viele Anfragen von Benutzern erhalten, einen "Vollabsauger" zu entwickeln, und wir wurden von der Firma WR'S gebeten, einen "Vollabsauger" zu entwickeln..
Entwickeln Sie bitte eine volle Leistungsspezifikation, die nur mit einem vollen Auspuffsystem mit geringer Leistungsänderung im Falle eines Slip-on möglich ist..
Der obige Antrag wurde an WR'S.
Mehrere Hersteller haben bereits Slip-Ons auf den Markt gebracht, aber WR'S hat ein vollständiges Auspuffsystem als Reaktion auf Kundenwünsche entwickelt, anstatt dem Beispiel zu folgen..
Der erste Schritt bei der Entwicklung dieses Vollauspuffs ist die Entwicklung eines Slip-on, der nicht zur Veröffentlichung vorgesehen ist..
Nachdem wir nach der besten Leistung mit diesem Slip-on gesucht hatten, nutzten wir ihn als Maßstab und begannen mit der Entwicklung eines Vollauspuffsystems..
Im Falle von Schlupf kann man einen leichten Anstieg des Drehmoments erzielen, aber nur einen leichten Anstieg der Leistung in der Spitze..
Doch mit dem vollen Auspuff beginnt die Leistung bei niedrigen Geschwindigkeiten zu steigen, ohne unter das normale Niveau zu fallen, und es ist uns gelungen, die Leistung in der Spitze um etwa 2 PS zu steigern..
Obwohl die CB250R 2 PS weniger als die CBR250R hatte, übertraf die Vollauspuffanlage die Spezifikationen der CBR250R, und die Vollauspuffanlage ermöglicht eine freie Anordnung des Auspuffrohrs. Das Bildmaterial ist so gestaltet, dass es die.
Der mittlere Teil des Auspuffrohrs ist ein "Ovalkammerrohr"..
Die Klangqualität und die Lautstärke des einteiligen Tons wurde unterdrückt, um einen komfortablen einteiligen Klang zu erzielen, der sowohl für den Einsatz in der Stadt als auch auf Tourneen ideal ist..
Das Auspuffrohr besteht aus rostfreiem Stahl, und die Oberfläche ist mit "O. M. J. Eine Oberflächenbehandlung namens "N-Beschichtung" wird angewendet.
Der rostfreie Stahl beginnt mit einer goldbraunen Farbe, aber er wird stumpf und korrodiert bei Gebrauch..
Dies ist ein High-End-Vollauspuffmodell mit dieser speziellen Beschichtung, aber der Preis ist sehr vernünftig, so dass wir hoffen, dass so viele Benutzer wie möglich ihn in die Hände bekommen..
The performance was thoroughly checked by the bench test, and it was developed to make the best use of the characteristics of CB250R.
The concept is to pursue the power feeling and visual which cannot be achieved by slip-on.
A chamber pipe is adopted in the middle of the center pipe, and while maintaining the overwhelming power feeling, it suppresses the bursting sound unique to a single engine at full throttle and reduces the unpleasant noise, realizing "fast and comfortable" driving.
In terms of power, the response has been improved, and from low speed to high speed, it kicks up powerfully without falling below the stock range.
In terms of sound quality, it is finished so that you can enjoy its comfort not only for town use but also for touring.
On the visual side, it is a high-end specification with O.M.J.N coating that "keeps its shine semi-permanently".
It is a product that you can enjoy "the texture that doesn't change with age" that suppresses the progress of corrosion by the exhaust heat forever.
For the development of the exhaust for CB250R (model 2BK-MC52), WR's decided to use a full exhaust system instead of a slip-on system.
And here's why....
・The CB250R has a black painted stock exhaust pipe, which is not visually pleasing or uncomfortable when replaced with a slip-on.WR'S has received many requests from users to develop a full-expansion model.
・The power change is small in the case of the slip-on, and I want you to develop the full power specification of the full exhaust.
Requests such as the above have been sent to WR'S.
Several manufacturers have already released slip-on exhaust systems, but WR'S has decided to develop and release a full exhaust system in response to user requests.
The first step in the development of this full exhaust is to develop a slip-on exhaust, which is not planned to be released.
After finding the best performance with this slip-on, WR's started to develop the full exhaust using this slip-on as a benchmark.
In the case of slip-on, it can increase the torque slightly, but it can only increase the output slightly at the peak.
However, with the full exhaust, the power started to increase from the low speed range without dropping below the stock level, and at the peak, the power increased by about 2 horsepower.
By the way, CB250R was 2 horsepower less than CBR250R in the catalog specification, but by using the full exhaust system, it was able to surpass the catalog specification of CBR250R. The full exhaust system can be freely laid out from the exhaust pipe, giving the bike a more attractive visual appearance.
The middle part of the exhaust pipe is an "elliptical chamber pipe".
Not only the volume but also the sound quality of the single sound has been suppressed and a comfortable single sound has been realized, and it is the specification that does not choose the environment of use from town use and touring use.
The exhaust pipe is made of stainless steel and the surface of the exhaust pipe is treated with "O.M.J.N Coating" which prevents the stainless steel from being burnt by the exhaust heat and keeps the shine of the exhaust pipe permanently.
Stainless steel has a golden color at first, but it changes to a dull color and corrodes in the process of use.
This is a high end model full exhaust with this special coating, but the price is kept reasonable, so WR's hope that as many users as possible can get their hands on it.