- Motorradteile
- Motorteile
- Zündungsteile
- Zündkerzen
- NGK
- NGK - Zündkerzen
- Produktliste
- Iridium-Stecker IMR9D-9H 6544
Iridium-Stecker IMR9D-9H 6544
Product # IMR9D-9H
12.43 EUR (2,026 JPY)
List price: 14.42 EUR Save 14%
+20 Webike Punkt (0.12 EUR)
Product # IMR9D-9H
12.43 EUR (2,026 JPY)
List price: 14.42 EUR Save 14%
+20 Webike Punkt (0.12 EUR)
[NGK-Stecker-Funktionen] |
- Es ist ein Super-"Wide Range"-Stecker - |
Die zentrale Elektrode ist mit einem Kupferkern konstruiert, der bis zur Spitze umschlossen ist, um eine große Wärmemenge schnell abzugeben.. Als Ergebnis wurde ein Ultra-Weitbereichspfropfen erreicht, der resistent gegen Brennen und Schwelen ist.. |
Vergleicht man die thermischen Eigenschaften von Steckern mit und ohne Kupferkern, so zeichnen sich Stecker mit Kupferkern durch hervorragende thermische Eigenschaften und Fleckenbeständigkeit aus und haben einen größeren thermischen Bereich.. |
Heizwert des Steckers |
- Das hochtonerdehaltige Porzellan von New Ceramics wird als Isolator verwendet. |
Ausgezeichnete Isolierung bei hohen Temperaturen und zuverlässige Funkenbildung. Gute Wärmeleitfähigkeit zur Vermeidung von Überkochen. Ausgezeichnete mechanische Festigkeit und Beständigkeit gegen Wärmeschock (schnelles Aufheizen und Abkühlen). |
- Die Struktur ist stark und luftdicht - |
Ausgezeichnete Luftdichtheit und strukturelle Festigkeit, da der Isolator und die Hauptarmaturen durch Spezialpulver verbunden sind.. |
Spezielle Elektroden aus einer Nickellegierung werden für eine ausgezeichnete Haltbarkeit verwendet.. |
- Wellungen im Isolator gewährleisten die Isolierung und verhindern Überschläge. |
Zwischen dem Terminal und den Hauptanlagen im Park wird ständig Hochspannung angelegt.. Hohe Spannungen neigen dazu, entlang der Oberfläche des Isolators zu streuen, und je höher die erforderliche Spannung zwischen den Funkenstrecken ist, desto wahrscheinlicher wird ein Überschlag auftreten.. Um einen Überschlag zu verhindern, sind Isolatorwellungen vorzusehen und der Abstand zwischen der Klemme und den wichtigsten Metallteilen zu vergrößern, um die Isolierung zu gewährleisten und einen Überschlag zu verhindern.. |
Was ist ein Flashover... |
Der Funke soll zwischen dem Terminal und der Hauptarmatur überspringen, wie auf dem Bild zu sehen. |
Überschlag |
Ausgezeichnete Stecker. |
[Features of NGK plug] |
- This is a super "wide range" plug - |
The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
■ Heat value of the plug |
- High alumina porcelain from New Ceramics is used as the insulator - |
- Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
- Strong and airtight in construction - |
Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
Special Nickel alloy electrodes are used for superior durability. |
- Corrugations in the insulator ensure good insulation and prevent flashover - |
During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
What is a flashover... |
It is a spark between the terminal and the main unit fitting as shown in the image. |
■ Flashover |
■The advantages of the plug |
Model Page Links
4.5 / 5
664 Bewertungen
Fits: HYOSUNG RX125 99- [Required number]1, KYMCO Ve-Knocks 250 Required quantity]2, HONDA VFR750 displacement]750 [number of units required]4, HONDA VFR750F 90-93 RC36 [displacement]750 [number of units required]4, HONDA VFR800 98-02 RC46 Domestic model 98.4-02.1 [displacement]800 [number of units required]4
I was going to go for the standard OEM spark plugs for this service but when I saw the price of the iridium ones for the CBF1000, it was a no brainer to get these bad boys. These were easy to find using the tools provided by Webike and all the links to the manufactyrers websites.The cost was very good and purchased a set of 4.I have used iridium plugs before with great success as they seem to fire better than standard. I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice and snug. The plugs themselves are perfect. I have had some plugs befpre from overseas suppliers and generally, one of those had been a dud or just been broken during transit. Not this time. All 100% perfect and fired as they should. They do have a better performance than standard plugs but you would have to be a professional to actually notice the difference of the bat. Once fitted, the bike just feels smoother. Take your time and don't over tighten. One very happy customer. Thanks WebikeView Detail
Fits: HONDA HORNET-S PC34 European specification [displacement]600 [number of units required]4, HONDA HORNET 99-07 CB250F MC31 99.12-07 [displacement]250 [number of units required]4, HONDA XR250R 95- [displacement]250 [number of units required]1, HONDA VFR800 98-01 Reimport [displacement]800 [number of units required]4, HONDA VFR750R 87- RC30 [displacement]750 [number of units required]4
i have always used NGK Iridium Plug CR9EHIX-9 4273 spark plugs they are the best for long run.i have used this spark plugs on my honda cbr xx superblack bird 1998 model they work very well no maintainance required.View Detail
Fits: KAWASAKI 1400GTR 08-, KAWASAKI ER-6f 06-, KAWASAKI ER-6f 12-, KAWASAKI ER-6n 06-, KAWASAKI Ninja 650 12-21
I wanted to try out the iridium plugs on this old girl for my own peace of mind and to see if there is much difference between these and standard. These were easy to find using the tools provided by Webike and all the links to the manufactyrers websites.The cost was very good and purchased a set of 4. I have used iridium plugs before with great success as they seem to fire better than standard but never in this 2002 R1. I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice and snug. The plugs themselves are perfect. I have had some plugs befpre from overseas suppliers and generally, one of those had been a dud or just been broken during transit. Not this time. All 100% perfect and fired as they should. They do have a better performance than standard plugs but you would have to be a professional to actually notice the difference of the bat.Once fitted, the bike just feels smoother. Take your time and don't over tighten. One very happy customer. Thanks WebikeView Detail
Fits: HONDA HORNET-S PC34 European specification [displacement]600 [number of units required]4, HONDA HORNET 99-07 CB250F MC31 99.12-07 [displacement]250 [number of units required]4, HONDA XR250R 95- [displacement]250 [number of units required]1, HONDA VFR800 98-01 Reimport [displacement]800 [number of units required]4, HONDA VFR750R 87- RC30 [displacement]750 [number of units required]4
The cost was very good and purchased a set of 4.I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice.Thanks WebikeView Detail
Fits: HONDA HORNET-S PC34 European specification [displacement]600 [number of units required]4, HONDA HORNET 99-07 CB250F MC31 99.12-07 [displacement]250 [number of units required]4, HONDA XR250R 95- [displacement]250 [number of units required]1, HONDA VFR800 98-01 Reimport [displacement]800 [number of units required]4, HONDA VFR750R 87- RC30 [displacement]750 [number of units required]4
Good produt.Performance was increased and it lasted a long time.About quality and textureAbout the feeling of useProducts to buy togetherDifficulty of installationCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
Bitte wählen Sie Option, bevor in den Warenkorb legen.
Kundendienst
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.