Straße
einstellbar
Position : 25/40 mm nach oben/15/30 mm nach hinten
*Die Position der Stifte kann mit den beiden M8-Schrauben, mit denen die Aufhängeplatte an der Hauptplatte befestigt ist, auf 4 Positionen eingestellt werden. Die Länge des Getriebearmes/der Getriebestange muss nach der Änderung der Position angepasst werden. Aus Sicherheitsgründen. Stellen Sie vor der Anwendung sicher, dass alle Verbindungselemente sicher befestigt sind / Bei 2x M8 Schrauben wird empfohlen, Schraubensicherungsmittel (z.B. Loctite 242) zu verwenden.
*Dieser RC390-Bausatz ist möglicherweise mit dem RC125 / RC200-Rahmen kompatibel. Bitte informieren Sie sich jedoch über Probleme mit der Getriebeverbindung und Unterschiede bei der Montage zwischen RC-Modellen.
street
adjustable
Position: 25/40mm up / 15/30mm back
*The peg position can be adjusted to four positions with the two M8 bolts that attach the hanger plate to the main plate.After changing the position, it is necessary to adjust the length of the gear shift arm / link rod. For safety reasons. Before use make sure that all fasteners are tightened securely, / for 2 x M8 bolts the manufacture recommend the use of thread locking agent (e.g. Loctite 242).
*This RC390 kit is supposed to be compatible with RC125 / RC200 frames, but please check for information on gear linkage issues and fitment differences between RC models.