・Fuel control for each individual cylinder in a smaller enclosure
Kraftstoffanpassung beim "Warmlaufen" (das Gerät liest die Motortemperatur ab und ermöglicht Kraftstoff-/Timing-Anpassungen auf der Grundlage der Messung)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer;9 volt adapter is no longer needed
・Two-position map-switching function built in
・Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear/speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
Erweitertes Dienstprogramm "Beschleunigungspumpe".
・For Offroad and ATV, see appropriate catalog under Moose Power Commanders
・Made in the U. S. A.
SECONDARY FUEL MODULE
・Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
Wenn der Gangpositionseingang an Ihr PCV angeschlossen ist, können Sie alle Einspritzdüsen auf einer "Pro-Gang"-Basis einstellen.
・Allows for the adjustment of all eight-injectors
・See application chart for availability
・Single cable connection to the PCV
・Connects to the upper injector rail using OEM connectors
・You can also map each injector separately, giving you up to 48 complete maps
Der "Basis"-Modus ermöglicht es Ihnen, eine einzige Kraftstofftabelle zu haben, die einfach den gewünschten Kraftstoffwechsel in den oberen und unteren Einspritzdüsenmodulen auf Zur gleichen Zeit
・Adjust both upper and lower injectors by as much as +250/-100%
Der "Basis"-Modus ist die perfekte Einstellung für modifizierte Motoren, die mehr Kraftstoff benötigen, als vier Einspritzdüsen liefern können, aber nicht die Komplexität der Abbildung jedes Zylinders und jedes Zahnrads separat
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
・Once the sensor is attached you will have full Quick Shifter functionality
・The QEM connects to the upper injectors and then into the PCV
[Referenzübersetzung]
Kraftstoffregelung für jeden einzelnen Zylinder in einem kleinen Gehäuse
Kraftstoffanpassung beim "Warmlaufen" (das Gerät liest die Motortemperatur ab und passt Kraftstoff und Zeiteinstellung auf der Grundlage der Messwerte an)
Größenreduzierung von PCIII USB
Leicht zu installieren
USB wird vom Computer versorgt; 9-Volt-Adapter werden nicht mehr benötigt
Eingebaute 2-Positions-Kennfeld-Schaltfunktion
Ein einpoliger Single-Throw-Schalter (SPST) wurde hinzugefügt, um zwischen den beiden verschiedenen Brennstoffkarten umzuschalten.
Sie können die Karte basierend auf Zahnrädern anpassen, indem Sie Zahnräder und Geschwindigkeiten eingeben.
Bei Verwendung des Analogeingangs können Sie einen 0-5 V-Sensor anschließen.
Erstellen Sie Anpassungstabellen basierend auf analogen Eingängen wie Boost oder Temperatur.
Mit dem Power Commander V können Sie jeden Zylinder einzeln abbilden..
Mehr Abstimmbereich als PCIII USB
Verbessertes Dienstprogramm "Beschleunigte Pumpe".
Für Offroad- und ATVs sehen Sie bitte im entsprechenden Moose Power Commanders-Katalog nach..
Hergestellt in den USA
Sekundärbrennstoff-Modul
Der Dynojet-Schnellschaltsensor kann auf dem Motorrad mit 8 Einspritzdüsen verwendet werden, um eine zusätzliche Kraftstoffkontrolle und Schaltfunktion zu ermöglichen.
Wenn der Getriebepositionseingang an das PCV angeschlossen ist, können alle Injektoren in "Getrieben" eingestellt werden.
Alle 8 Injektoren können eingestellt werden.
Siehe die verfügbare Anwendungstabelle.
Ein-Kabel-Verbindung zum PCV
Mit dem OEM-Stecker an die obere Injektorschiene anschließen.
Jeder Injektor kann separat abgebildet werden, um bis zu 48 Karten zu erstellen.
Im "Basic"-Modus kann eine einzige Kraftstofftabelle bereitgestellt werden, um den gewünschten Kraftstoffwechsel gleichzeitig in die oberen und unteren Einspritzdüsenmodule einzuspeisen.
Injektoren + 250/ -100%.
Der "Basic"-Modus ist die perfekte Einstellung für einen modifizierten Motor, der mehr Kraftstoff als vier Einspritzdüsen benötigt, aber nicht die Komplexität erfordert, jeden Zylinder und jeden Gang separat abzubilden.
QUICK SHIFTER EXPANSION MODULE
Das QEM ermöglicht die Verwendung des Dynojet-Schnellschaltersensors mit dem Power Commander V auf einem Motorrad mit acht Einspritzdüsen.
Sobald der Sensor angebracht ist, steht die volle Funktionalität des Quick Shifters zur Verfügung.
Die QEM wird an den oberen Injektor und dann an das PCV angeschlossen.
・Fuel control for each individual cylinder in a smaller enclosure
Warm-up" fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer;9 volt adapter is no longer needed
・Two-position map-switching function built in
・Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear/speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
Enhanced "accel pump" utility
・For Offroad and ATV, see appropriate catalog under Moose Power Commanders
・Made in the U. S. A.
SECONDARY FUEL MODULE
・Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
If the gear position input is connected to your PCV, you can adjust all of the injectors on a "per gear" basis.
・Allows for the adjustment of all eight-injectors
・See application chart for availability
・Single cable connection to the PCV
・Connects to the upper injector rail using OEM connectors
・You can also map each injector separately, giving you up to 48 complete maps
The "basic" mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at The same time
・Adjust both upper and lower injectors by as much as +250/-100%
The "basic" mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
・Once the sensor is attached you will have full Quick Shifter functionality
・The QEM connects to the upper injectors and then into the PCV
R&G Aero Crash protectors features our stylish, aerodynamic Aero Bobbins and are available in Black or White options
Fuel control per individual cylinder in the Smaller claw jar
Warming Up" fuel adjustment (Unit that reads the engine temperature and allows fuel/timing adjustments based on the readings)
Size reduction from PCIII USB
Installation is easy.
USB supplied by Computer; the 9BoltAdapter is no longer needed
Built-in 2Position Map Switching Function
SinglePoleSingleThrow(SPST)Switch is added and two different fuel maps can be switched.
You can adjust the map based on GEAR by inputting GEAR and speed.
By using Analog input, you can attach a 0-5 V Sensor.
Create the adjustment table based on the analog input such as Boost or temperature.
The Power-Helmet CommanderV allows you to map each cylinder individually..
TuningsRange more than PCIII USB
Enhanced "Accelerated Pump" Utility
For Offroad and ATVs, please refer to the appropriate Catalogue of Moose Power Commanders..
・Made in USA
Secondary Fuel Module
The DynojetQuick shifterSensor can be used on eight InjectorMotorcycles to provide additional fuel control and shifter functionality.
If the GEAR position input is connected to a PCV, all injectors can be adjusted in "GEAR unit".
All 8 injectors can be adjusted.
See Available Applications Chart.
Single cable connection to PCV
Connect to the upper injector rail by using the OEMConnector.
It is possible to map each injector separately to complete a map of up to 48 injectors.
The "Basic" mode allows for a single fuel table to feed the requested fuel changes into both the upper and lower injector modules simultaneously.
Injectors + 250/ -100%.
The 'basic' MODE is the perfect setting for a modified engine that requires more fuel than 4 injectors but does not require the complexity of mapping each cylinder and each GEAR separately.
QUICK SHIFTER EXPANSION MODULE
The QEM allows the Dynojet Quick shifterSensor to be used with the Power Commander V on a motorcycle with eight injectors.
Once the Sensor is installed, the full features of Quick Shifter can be used.
The QEM is connected to the upper injector and then to the PCV.