*Es wird nicht mehr mit einem großen Zaubergürtel und S-Haken am Rücken geliefert. *Bild 3 ist ein Bild einer Duplex-Struktur. *Bild 4 ist ein Bild des inneren Teils. Normalerweise ist es nicht möglich, den inneren und äußeren Teil zu trennen. *Die Ninja H2 ist auch mit einer speziellen Innenhalbverkleidung "Takumi Micro Queen" (auf Bestellung) erhältlich.
[Material] Outside: Gunmetal Polyester OX 250 Denier Inside: Front upper polyester pan lace Inside: Backward Black Broad
[Size: L Super Sport] Full Length: 215 / Height: 125 / width: 100/tail height: 115/over rear width: 60/ Lower rear width: 50cm)
*The large magic belt and S-hooks at the rear have been removed. *Image 3 is an image of a duplex structure. *Image 4 is an image of innerwear.Normally, it is not able to be divided the outside and inside. *Ninja H2 has been tested but we do not guarantee the integrity of the exterior.Takumi Micro Queen" is also available for Ninja H2. *There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
* Dieses Produkt wird nach einer Bestellung vorgenommen werden, werden wir currect Lieferzeit feststellen, nachdem wir einen Auftrag empfangen.
Dieser Artikel * kann nicht storniert werden, kehrte noch Austausch nach der Bestellung.
* Das Bild ist nur als Referenz. Das gezeigte Bild kann vom tatsächlichen Produkt abweichen.
*Takumi Bike Cover Version 2 Aufstellung! Takumi Bike Cover, die Top-Marke für Motorradabdeckungen, wurde erneuert!. Die beliebten Spezifikationen des Vorgängermodells wurden beibehalten und weiter verbessert..
Bike Cover Takumi ist eine einzigartige doppellagige Struktur. Um das Fahrrad vor Regen, Wind, Staub und UV-Strahlen zu schützen, wird die Abdeckung von außen und innen getrennt hergestellt, und jedes Teil besteht aus Materialien höchster Qualität.. Jede von ihnen hat ihre eigene dreidimensionale Drapierung und wird mit der Zeit und Mühe von zwei Standardbezügen hergestellt.. Das Oberkleidungsstück ist mit Rotguss beschichtet, um eine Degradierung durch UV-Strahlen zu verhindern, und ist mit Doppelnähten versehen, um das Eindringen von Wasser zu reduzieren und die Festigkeit der Nähte zu erhöhen.. Jeder Teil der Innenbekleidung besteht aus einem hoch hitzebeständigen Material, um die Abnutzung des Fahrrads zu verringern.. Es handelt sich um ein ausgezeichnetes Produkt, das vom Handwerker hergestellt wurde, um die Anforderungen an die Fahrradhülle auf hohem Niveau wie Gebrauchstauglichkeit und Alltagstauglichkeit zu erfüllen..
Doppelnähte zur Reduzierung des Eindringens von Regenwasser. Mit hitzebeständigem Material bedeckter Mittelgurt. Lüftungsöffnungen für bessere Belüftung.. Locker-sichere Gürtelschnalle. Großes, einfach zu verwendendes Verschlussloch. Farbcodierung zur einfachen Unterscheidung. Zugkordel-Halter. Vorne/2,Hinten/1 Griff. Lose gesicherte Spindel.
[Änderungen gegenüber dem Vorgängermodell] Der Markenname wurde von MCP in Takumi geändert. Ein Aufbewahrungsbeutel aus Netz und Taft-Hybrid Der Mittelgurt wurde in eine hitzebeständige Version geändert.. Doppelte Nähte statt einfacher Nähte, um das Eindringen von Regenwasser zu reduzieren.. Zwei obere Frontgriffe wurden hinzugefügt, um das Entfernen zu erleichtern.. Zwei vordere Griffe und ein hinterer Griff, geändert auf UV-beständiges Material Off-Level- und Off-LL-Größen werden in LH und LLH geändert.. Zusätzliche Größe für Abenteuerklasse. *Die S-Dose aus Edelstahl ist nicht mehr enthalten.
Körpermaterial: Außen Außenhülle aus Rotguss, Polyester OX250 Denier.. UV-Beständigkeit und hohe Haltbarkeit.
Gehäusematerial: Rückseite innen Schwarze Innenbekleidung wird aus einem speziellen hitzebeständigen Material namens "Broad" hergestellt.. Es ist sicher, den Motor, Schalldämpfer usw. zu berühren, nachdem das Fahrzeug angehalten hat..
Körpermaterial: Inneres vorderes Oberteil Für den Bildschirm und den Lenkerbereich auf der oberen Vorderseite wird weiche Polyester-Pan-Spitze verwendet..
Nähen: Doppeltes Nähen Alle Nähte sind doppelt genäht und doppelt genäht, um die Festigkeit zu erhöhen und die Überflutung zu verringern..
Mittelgurt Bruchsicherer Gürtel. Kann von beiden Seiten angebracht und abgenommen werden. Advance Inneres Material, das auch in Takumi Advance verwendet wird, wird verwendet. Die Hitze des Auspufftopfes wird ihn nicht schmelzen..
Doppelseite: Schnalle Glocke und Verstellvorrichtung auf bruchsicherem Mittelband. Stark zugfeste und nicht durchhängende Struktur. Beidseitig bestückt.
Handhabung Zwei praktische Griffe vorne und einer hinten für einfache Bedienung. Verwendet ein Material, das gegen UV-Degradation beständig ist.
Die Felsenhalle Verriegelungslöcher vorne und hinten für Sicherheitsvorrichtungen. Vorderseite/Gelbe und Rückseite/Schwarze Farbcodierung zur einfachen Identifizierung der Vorder- und Rückseite bei installierter Abdeckung.
Doppelt: Stopper◆ Schnüre mit vorderer und hinterer Öffnung. Es wird in echten Outdoor-Produkten verwendet und hat einen Doppelstopfen, um starken Winden standzuhalten..
Luft: Entlüftung Luftventuri auf beiden Seiten. Dadurch soll die Ansammlung von Feuchtigkeit im Inneren verhindert und die Entstehung von Rost verhindert werden..
Der Schwanz: Mark. Engagement für Benutzerfreundlichkeit im täglichen Leben. Nur die Rückwand ist schwarz, und die vorderen und hinteren Identifizierungszeichen werden zur Identifizierung der Vorder- und Rückseite des Fahrzeugs verwendet..
Aufbewahrungsbeutel Ein spezieller Aufbewahrungsbeutel ist im Lieferumfang enthalten.. Leicht zu verwenden, auch wenn der Bezug feucht ist, mit einem atmungsaktiven Netzmaterial.
Bike Cover zum Schutz Ihres Autos! Webike TV] ↓
★Takumi Bike Cover Version 2 Lineup! Takumi Bike Cover, a top brand of motorcycle covers, has been renewed. The specifications that have been popular in the previous models have been maintained, and the functions have been further improved.
Takumi motorcycle cover has a unique double-layered structure. In order to protect the bike from rain, wind, dust and ultraviolet rays, the cover is manufactured separately on the outside and inside, and the highest quality materials are used for each part. Each of them is manufactured with a unique three-dimensional cutting method, which requires the same amount of time and effort as two regular covers. The outer is coated with gunmetal to prevent deterioration due to ultraviolet rays, and is finished with double sewing to reduce water penetration and increase the sewing strength of the joints. Each part of the inner lining is made of a material that reduces scratches on the bike and has high heat resistance. This is an excellent product made by craftsmen to meet the requirements of motorcycle covers such as daily usability and fitting at a high level.
・Double seams to reduce rainwater penetration. ・Center belt covered with heat-resistant material. ・Air vents for better ventilation. ・Anti-loose belt buckle. ・Large, easy-to-use locking holes. ・Color-coded for easy identification. ・Drawcord holder. ・Front / 2, Rear / 1 handles. ・Spindle with anti-loosening structure.
[Changes from previous model] ○Changed the brand name from MCP to Craftman. ○The storage bag is made of a hybrid of mesh and taffeta ○Changed the center belt to a heat-resistant specification. ○The sewing was changed from single stitch to double stitch, reducing the intrusion of rainwater. ○The handle of the upper part of the front is increased to two places, and it became easy to remove.Changed to a material that is resistant to UV degradation, with two handles on the front side and one on the back. ○Changed the size notation of "Off L" and "Off LL" to "LH" and "LLH". ○Added the size of the adventure class. *The stainless steel S-can is no longer included
◆Body material: Outer◆ The gunmetal outer shell is "polyester OX250 denier".It is UV resistant and highly durable.
◆Body material: Rear inner side◆ The black inner lining is made of "Broad", a special material that is resistant to heat.It is safe to touch the engine and exhaust after stopping the vehicle.
◆Body material: Medial anterior upper◆ On the upper front side of the inner body, the windshield and handlebars are protected by a soft material called "polyester pan lace".
◆Sewing: double-stitched◆ In order to increase the strength and reduce water penetration, all sewing is double stitched and double sewn.
◆Center belt◆ Shatterproof belt. It can be removed from either side.Adopt the advance inner material also used in Takumi advance.It will not melt even under the heat of a exhaust.
◆Double-sided: buckle◆ Bell and adjuster on shatterproof center belt. The structure is strong in tension and does not sag easily.Equipped on both sides.
◆Handle◆ Two handles on the front and one handle on the back for easy operation.UV-resistant material is used.
◆Rock Hall◆ Front and rear lock holes for security equipment.The front / yellow and back / black color coding makes it easy to identify the front and rear when the cover is installed.
◆Double: Stopper◆ Tie cords at front and back.The double stopper is used for authentic outdoor products and can withstand strong winds.
◆Air: Bent◆ Air vent on both sides.This is a device to prevent moisture from accumulating inside and to suppress the occurrence of rust.
◆Tail: Mark◆ A commitment to ease of use in everyday life.Only the rear panel is black to identify the front and rear of the vehicle.
◆Storage bag◆ It comes with its own storage bag.Breathable mesh material, easy to use even when the cover itself is damp.
outline Motorcycle Cover with high protection performance.
Reason for purchase I was looking for a Motorcycle Cover that would not scratch my Motorcycle and I found this product.
Appearance etc. Included in the box is a Motorcycle Cover, a bag to hold the Motorcycle Cover, and a fixed Belt. The inside was not a crumbly fabric, but a soft fabric was used for the parts that touch the Motorcycle, and it felt like a double layer with the outside fabric.
how to use The basic method of hanging the cover would be the same as a regular Motorcycle Cover. Hang the cover from the rear side, and then hang the front side. After that, there is a front and rear drawstring, so pull the string and draw it down.
Impression used I have been using it for about six months without any scratches on the Motorcycle, so I have the impression that the soft inner fabric is working well. Compared to cheap Motorcycle Covers, the thickness and Material of the fabric is obviously different, so you can tell that they are made of good stuff. I wonder if the fabric of the exhaust system part is heat resistant to some extent, since it does not melt due to the heat of the exhaust system even if it is applied immediately after use. Since the size is just right, the front part of the Motorcycle Cover seems to be slightly caught on the Mirror when removing/attaching it, so it may require some hang to hang it. When it rains, water leaks through the joints and the inside gets very wet and stuffy. It is better to put tape on the joints, etc. by yourself. Durability is unknown, but the underside of the fabric looks a bit weathered, but not to the extent that it affects functionality.
Improvements It is scratch-resistant, but leaks badly from the joints, so I don't think it is a good enough product to be called a masterpiece.View Detail
I bought it again at Timing for a Motorcycle replacement. My previous Cover also used Takumi, and I think I used it for about 10 years. I used a number of covers before I got to this Takumi Cover. Many of them were cheap and tore the Cover in a year, and many of them were not original. However, while the Cover is a bit pricey, it is very durable. If it's a long-running motorcycle, it's worth the initial investment, but it's well worth the price. View Detail
I was using the Cover that was used for the previous vehicle so far, but because it became noticeable as dirt and tear, it decided to replace. This time, I emphasized on replacing scratches on vehicles etc. when hanging Cover etc.. It is hard to enter. In various colors, TAKUMI Bike Cover used different materials for Inner and Outer, so the Wound seemed to be entering and I made it the first candidate. The problem is that the price is a bit high. The second option is to purchase the Inner cover, and then multiply the Cover that you used until then. Although this is cheap, it is necessary to hang two pieces of Inner and Outer each time. Also, as the Outer will remain ragged look like it is, he decided to go with the first candidate quietly. TAKUMI Bike Cover arrived has good touch, Inner which seems not to enter Wound in the vehicle and relatively thicker Outer are united and it seems to protect the vehicle firmly. I purchased this time "LSUPER SPORTS 750" Size is relatively large pattern F4R in SSClass It is ExactlySize so it seems that other SSClass can be used without problems. Also, Mirror part and car body Rear are equipped with handlebar as a handle, Velcro which can fix Draw cord is attached and it is made to reach the itchy place. Although the absolute price is high, considering that it covers the large motorcycle, it is satisfactory to say that it can be said to be Reasonable because it is still good with details even with Inner and Outer two pieces.View Detail
Bitte wählen Sie Option, bevor in den Warenkorb legen.
WHY
?
THE LARGEST SHOP IN JAPAN
EXCLUSIVE COUPONS, SALE, DEALS
FAST, RELIABLE SHIPPING
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!