EX-Rohrwerkstoff : Titan (Ti)
EX-Rohrdurchmesser : 42.7φ
Endrohr-Außendurchmesser : 60.5φ
*Die Endschalldämpfer sind zum Zeitpunkt der Lieferung bereits im Schalldämpfer eingebaut.
*Konische Titan-Schalldämpfer V-1/V-2/V-3 haben Stege, so dass kein Schalldämpferband enthalten ist.
Die Schalldämmkulisse des NITRORACING-Schalldämpfers darf nicht entfernt werden. Es wird auch empfohlen, die innere Dämpfungswolle des Schalldämpfers in regelmäßigen Abständen zu überprüfen und zu überholen.
Der Schalldämpfer der Granate aus Titan wird mit einem Schalldämpferband von 90 mm Durchmesser montiert.
Sie müssen zu einem einzigen Typ Rückschritt wechseln. Wenn Sie von der Standard- zur Tandemstufe wechseln, muss der Rahmen der Tandemstufe geschnitten werden.
Bei Fahrzeugen, die bereits mit dem NITRO RACING Tandem Step KIT Typ 1 ausgestattet sind, ist es möglich, dass der obere Teil des Schalldämpfers in Abhängigkeit von der Position der Montageplatte mit dem Tandem Step KIT interferiert. Wir empfehlen Ihnen die Verwendung des Tandem Step KIT Typ 2.
Einige Arten von Blinkern können den Schalldämpfer stören. In diesem Fall müssen Sie die Scheuklappen wechseln.
Es ist erforderlich, den Ölfilterdeckel und die Ablassschrauben gegen flache Ausführung auszutauschen. Das Kit für flache Abdeckung & Ablass ist im Zubehör dieses Produkts enthalten. Bitte wechseln Sie es aus, wenn Sie den Auspufftopf installieren.
Exhaust pipe material: Titanium
Exhaust pipe diameter: Φ42.7
Tail pipe outer diameter: Φ60.5
*The end baffle is pre-installed on the silencer at the time of shipment.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
Never remove the exhaust baffle from the NITRO RACING silencer.It is also recommended to check and overhaul the silencer's internal sound deadening wool on a regular basis.
The grenade titanium silencer will be mounted with a φ90 silencer band.
It is necessary to change to a single type rearset.In this case, it is necessary to cut off the frame of the pillion step when you replace the stock one with this product.
For bikes already equipped with the NITRO RACING Pillion Step Bracket KIT Type 1, the upper part of the silencer and the Pillion Step KIT may interfere with each other due to the welding position of the mounting plate.It is recommended to use Pillion Step Bracket KIT Type 2.
Depending on the type of blinker, it may interfere with the silencer.In this case, you will need to replace the blinkers.
The oil filter cover and drain bolts must be changed to a flat type.The Flat Cover & Drain KIT is included as an component of this product and should be replaced when the exhaust is installed.