Easy to install with a slotted screwdriver and radio pliers It can be installed
The performance is not so flashy riding, so the one point of appearance is more important than the function It's become Main (⌒-⌒;)
Remove the screw cap with a slotted screwdriver and screw it in by hand It is
But there's a chance that it could come loose even if you tighten it as hard as you can
So, I tightened it by hand with Radio pliers, and then lightly tightened it to make it harder to loosen I think
But you do need to check in regularly (^^)



























This picture was provided by our customers, which maybe similar but different product.
・Diese Option ist nicht verfügbar.
・Bitte wählen Sie andere Optionen.
16.31 ~ EUR (2,814 JPY) 16.81 EUR Save 3%
Lieferinformationen
-
Please select product form first.
Product detail
Anzahl der Einträge : Zwei.
Schneckendurchmesser : M5
Gewindesteigung : P0.8
*
*Empfohlenes Anzugsdrehmoment 0,1 Nm
*KX250F 11,YZ85,RMZ250/450 13- Nicht verfügbar
*Nicht verfügbar für HASQVARNA- und Marzocchi-Gabeln.
*Bild nur als Referenz. Andere Farben sind enthalten..
Quantity: 2pcs.
Screw diameter: M5
Screw pitch: P0.8
*
*Recommended tightening torque 0.1 Nm
*KX250F 11, YZ85, RMZ250 / 450 13- Not available
*Not available for HASQVARNA and Marzocchi forks
*Images are for reference only.Other colorings are included..
Einstellbarer Luftdruck in den Vordergabeln mit einem Knopfdruck und ohne Werkzeuge zur Anpassung an den atmosphärischen Druck. Einfach zu installieren, einfach das Luftventil oben auf den Gabeln austauschen..
Vorsicht
* If there may be an instruction manual included, it will be written in Japanese.
Delivery Information
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Kundenbewertungen
5 stars
47%
4 stars
50%
3 stars
3%
2 stars
0%
1 star
0%
Very Good
Dec 30, 2018
It's good in conjunction with One Point (^^)
Very Good
Sep 1, 2018
Maybe there is a way to go to the forest road and some people to get on the Transporter ...
In the 5th year of the WR, although the air bleeding of F suspension was smolder after every four seasons and running
Air bleed Screw bought this item because Aluminum was nearly reaching its limit.
Air bleeder makes air bleeding far easier.
After forest roads and intense running, it is often good to have air piled up and feel free to push it out
Afterwards when shipping to the Transporter it was good to buy it because it will be easier to pull down and shrink as you shrink the air with Tie Down.
Just when trees such as forest roads are covered, it seems there is a possibility of breaking by obstacles, so be careful and be careful ... when it's bad, you can not do that
Very Good
Oct 3, 2016
I used Air Breeder on YZ125 which I used to ride, which used to be CR85 before, very convenient.
Air bleeding after traveling is also an easy trip, but it is because our house feels like necessities unless you shrink Fork by Tie Down when you are on the car, you will not ride a car. (Vehicle type Step WGN)
If there is a kore, if you pass through Psych and Air, Tie Down shrinks easily. Before installation, Tie Down will not cut, as long as you do not tighten it, I have not entered the car.
Naturally, the feeling of ruggedness of Fork after driving, also eliminating Ippatsu.
Excellent
Jul 2, 2016
Mounting to WR 250 R. When running in Hard, the Fork internal pressure rises and the suspension becomes hard, so it is an air valve to return to Large pressure. I am thinking, but there are also protection such as Oil seal and it is installed.
A little Let's press the pedestrian way even if you press Shoe, and Air comes out so there is quite a lot of pressure.
I think that there is no necessity so far because Manufacturer does not adopt OEM, but the appearance is Race ish.
The price is also cheap, and it is installed because it is better to be a part than surprisingly noticeable part.
Just always Sho is only One Side - - - I wasted more by worrying than installing it (Lol)
Excellent
Feb 22, 2016
TensionUp is definite if you do pushy
It's Impression of Hey Guys! Kazu.
For installation, just remove the OEMBreeder with a slotted screwdriver and screw it.
Before climbing the intense Hill climb before Race and forest road Pushkhu and TensionMax !!
You may be able to clear sections that you could not clear until now ...