- fits:
- HONDA NSR50
- HONDA GORILLA
- HONDA MONKEY
Used for NSR50.It works fineWeiterlesen - fits:
- YAMAHA TZM50R
- YAMAHA TZR50 R
- HONDA BENLY50CD90
- HONDA XR100
- HONDA XL80
- ...und mehr.
This is required for the maintenance of the NSR50 Clutch.When you remove the nut, you can use Impact Driver to remove the center check nut, but when you install it, you will need to use Torque wrench ...Weiterlesen - fits:
- HONDA NSR50
- HONDA GORILLA
- HONDA MONKEY
JA 07 Primary side of SuperCUB 110 (Centrifugation) Used for maintenance of Clutch. Pulley holder etc. are necessary to prevent co-rotation, but it was possible to use without problems.It may be a sto...Weiterlesen - fits:
- YAMAHA TZM50R
- YAMAHA TZR50 R
- HONDA BENLY50CD90
- HONDA XR100
- HONDA XL80
- ...und mehr.
I use it to unlock the Center's Lock nut when disassembling Clutch.Without this, the NSR type Engine can not be serviced.It is an essential item..Weiterlesen - fits:
- YAMAHA TZM50R
- YAMAHA TZR50 R
- HONDA BENLY50CD90
- HONDA XR100
- HONDA XL80
- ...und mehr.
In order to exchange Clutch in NSR 50, I bought a cheap import tool, but it was too accurate and was not going to be usable, so I thought it would be safe if it was a product of KITACO.The feeling I t...Weiterlesen - fits:
- HONDA NSR50
- HONDA GORILLA
- HONDA MONKEY
Buy for the first time trying to change Clutch. Clutch It is an indispensable tool if you exchange it. I am out of a variety of Manufacturers, but this was the one I chose. I tried using it and used i...Weiterlesen - fits:
- YAMAHA TZM50R
- YAMAHA TZR50 R
- HONDA BENLY50CD90
- HONDA XR100
- HONDA XL80
- ...und mehr.
Although a Package did not have a statement, it has been used also by HORNET (250 cc).
Clutch exchange requires a 27-mm Socket wrench other than this product.
Be careful in the case of exchange.
Weiterlesen - fits:
- YAMAHA TZM50R
- YAMAHA TZR50 R
- HONDA BENLY50CD90
- HONDA XR100
- HONDA XL80
- ...und mehr.
It certainly becomes an indispensable Items for Clutch exchange of the Engine of NSR50 system.
Certainly [ since Torque management etc. were not completed also when removing also attached when there ...Weiterlesen - fits:
- YAMAHA TZM50R
- YAMAHA TZR50 R
- HONDA BENLY50CD90
- HONDA XR100
- HONDA XL80
- ...und mehr.
It purchased on the occasion of Clutch O/H of NS-1.
There is only exclusive elegance too and greatest sense of security and working efficiency rise considerably.
Probably, the confidence which is...Weiterlesen - fits:
- YAMAHA TZM50R
- YAMAHA TZR50 R
- HONDA BENLY50CD90
- HONDA XR100
- HONDA XL80
- ...und mehr.
[Webike Monitor] Although there was that the Manufacturer of the VOX of the Lock nut is also different, the VOX side of a Lock nut was large, did not pass along the hole of middle, and did not use aft...Weiterlesen - fits:
- YAMAHA TZM50R
- YAMAHA TZR50 R
- HONDA BENLY50CD90
- HONDA XR100
- HONDA XL80
- ...und mehr.
It was used on the occasion of clutch exchange of CBR250R. It was quite easy-to-use, and it has worked, without a grip being slippery also by the hand wet from oil!Weiterlesen - fits:
- YAMAHA TZM50R
- YAMAHA TZR50 R
- HONDA BENLY50CD90
- HONDA XR100
- HONDA XL80
- ...und mehr.
It is a specialized tool of NSR50 required in the case of clutch decomposition. A clutch cannot be removed unless there are this and a center check nut wrench. It was actually able to be used and the ...Weiterlesen - fits:
- YAMAHA TZM50R
- YAMAHA TZR50 R
- HONDA BENLY50CD90
- HONDA XR100
- HONDA XL80
- ...und mehr.
Does it say [ that what is not is a large difference if there is this although purchased for clutch exchange ]? It is indispensable rather. if there is this when specification torque loosens and faste...Weiterlesen - fits:
- YAMAHA TZM50R
- YAMAHA TZR50 R
- HONDA BENLY50CD90
- HONDA XR100
- HONDA XL80
- ...und mehr.
The special tool was not used until now. If this is used, clutch exchange can be performed easily by itself. It is easy to fix!Weiterlesen
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING