HONDA Monkey 125: Motorteile

Speichern für später
OPMID OPM PnP-ThermometerMODELL: M1013Punkt: 452 pt55.41 EUR
5.0 (2 Bewertungen)
[Common to OPM series]
・Thermometer: Minus 10 degrees to 180 degrees (14-356 degrees Fahrenheit) *
・High temperature warning function and maximum temperature record
・Voltmeter: 8V-18V
・7 segments x 4 green LED transmissive display
・Touch-sensitive control buttons (right front)
・Body size: W57mm x H29mm x D10mm
・Equivalent to IP66 waterproof standard (no harmful effects from water jets from all directions)
・Stable working voltage: DC10-16V
HONDA glom (JC61/JC75)*'21 Grom (JC92) is not compatible.
HONDA CT125 (JA55)
HONDA MONKEY125 (JB02)*'21 Monkey 125 (JB03) is not compatible.
Speichern für später
SP TAKEGAWA Kompaktes cooles Kit (4F/Slim Line) (BTB & SP Kupplungsdeckel moMODELL: 07-07-0249Punkt: 1557 pt190.75 EUR200.55 EURsparen 9.8 EUR ( 5% )
5.0 (5 Bewertungen)
Number of stages of oil cooler body: 4 fin 5 oil line
Oil Hose Type: Slim Line Hose
Standard equipment: Oil Cooler Plate, Guard

[Specifications for installation]
The following clutch cover and engine parts must be installed at the same time.

・Clutch cover
・SP Takegawa Special Clutch Cover

Engine Specifications
SP Takegawa Hyper Tuning Kit (High Comp Piston) (Big Throttle Body Spec)
Or SP Takegawa big bore kit (big throttle body specification)
HONDA MONKEY125 (JB02-1000001-)
Speichern für später
SP TAKEGAWA TAF 5-Gang-Kreuzgetriebe-KitMODELL: 02-04-0293Punkt: 2852 pt349.42 EUR367.64 EURsparen 18.23 EUR ( 5% )
5.0 (4 Bewertungen)
HONDA GROM (JC61-1000001-/JC61-1300001-)
HONDA GROM (JC75-1000001-)
HONDA MSX125 (MLHJC618_D5000001-)
HONDA MSX125SF
HONDA MONKEY125 (JB02-1000001-)
Speichern für später
SP TAKEGAWA Kompakter LED-Thermometer-BausatzMODELL: 05-07-0009Punkt: 763 pt93.51~ EUR98.35 EURsparen ~4.84 EUR ( Bis zu 5% )
5.0 (3 Bewertungen)
Display range: 0-120 degrees
Drain bolt with magnet (M12 x P1.5) (red anodized) included
HONDA DAX125 (JB06)
HONDA MONKEY125 (JB05-1000001-)
HONDA DAX125 (JB04-1000001-)
HONDA MONKEY125 (JB02-1000001-/JB03-1000001-)
HONDA MSX GROM (MLHJC92)
HONDA MSX125 (MLHJC92)
Speichern für später
SP TAKEGAWA eStage Bore Up-Kit 143ccMODELL: 01-05-0380Punkt: 1192 pt146.1 EUR153.09 EURsparen 6.98 EUR ( 5% )
5.0 (1 Bewertungen)
Color: Silver paint
Cast pistons
Bore Diameter: 56mm
Compression ratio: 11.2: 1
Stroke: 57.9mm (Stock)
No camshaft
HONDA MONKEY125 (Thai Model | MLHJB02)
HONDA MONKEY125 (JB02-1000001-)
Speichern für später
SP TAKEGAWA S-Stufen-Aufbohrkit 181ccMODELL: 01-05-0385Punkt: 1814 pt222.28 EUR233.15 EURsparen 10.87 EUR ( 5% )
5.0 (5 Bewertungen)
Material: All aluminum ceramic plating (cylinder)
Compression ratio: 11.0: 1
Bore Diameter: 63mm
Stroke: 57.9mm (Stock)
Piston: High-octane gasoline specification (standard)
No camshaft
HONDA MSX125SF
HONDA CT125 (JA55-1000001-)
HONDA GROM (JC61-1000001-1299999)
HONDA GROM (JC61-1300001-)
HONDA GROM (JC75-1000001-)
HONDA MSX125 (MLHJC6181D5000001-)
Speichern für später
KITACO ÖleinfüllstutzenMODELL: 307-1300820Punkt: 194 pt23.82~ EUR24.92 EURsparen ~1.1 EUR ( Bis zu 4% )
5.0 (2 Bewertungen)

Type: Type 1
Material: Machined aluminum / anodized finish
Size: M20 x P2.50
Included: O-ring
Specifications: With wire lock through hole
Quantity: 1 pc.
HONDA glom All JC92 models
HONDA MONKEY125 All JB02 models/All JB03 models/All JB05 models
HONDA SUPER CUBC125 All JA48 cars
HONDA CT125CT110 HUNTER CUB All JA55 models
HONDA CRF1100LAfrica Twin All DCT SD10 models
HONDA CRF1100LAfrica Twin AdventureSports ES All SD10 models
Speichern für später
K-PIT Ölfilter Elemen H - 06MODELL: 70-390-11060Punkt: 32 pt3.88 EUR4.29 EURsparen 0.41 EUR ( 10% )
5.0 (6 Bewertungen)
[Compatible stock part number]
■HONDA: 15412-MGS-D21・15412-K0N-D01
HONDA GOLD WING SC79(DCT cover oil element)
HONDA REBEL1100 SC83(DCT cover oil element)
HONDA NT1100 SC84 (DCT cover oil element)
HONDA CRF1100LAfrica Twin SD10 (DCT cover oil element)
HONDA CRF1000LAfrica Twin SD04 (DCT cover oil element)
HONDA X-ADV RC95/RH10(DCT cover oil element)
Speichern für später
K-PIT Vollständiger Satz ÖlwechselMODELL: 70-390-01040Punkt: 62 pt7.57 EUR7.96 EURsparen 0.39 EUR ( 5% )
5.0 (3 Bewertungen)
[Complete components]
・Oil element: H-06
・Drain washer: 12 x 20 x 1.5
・Filler cap O-ring: OH-01
・Filter cover O-ring: OH-06
HONDA DAX125 All JB04 models/All JB06 models
HONDA SUPER CUB110 All JA59 models
HONDA glom All JC92 models
HONDA MONKEY125 All JB03 models/All JB05 models
HONDA CROSSCUB110 All JA60 models
HONDA HRC Grom (GROM5) 21-
Speichern für später
SP TAKEGAWA Hyper-ZündspuleMODELL: 05-02-0023Punkt: 274 pt33.56~ EUR35.12 EURsparen ~1.56 EUR ( Bis zu 4% )
5.0 (14 Bewertungen)
[Products tested for simultaneous installation]
・SP Takegawa FI-CON / FI-CON2 / FI-CON PLUS (various injection controllers)
・Super Multi-DN Meter, Medium LCD Speed & Tachometer
・D-type LCD Speed & Tachometer, Square LCD Meter
・Medium DN tachometer and Small DN tachometer

[Products that cannot be installed at the same time]
・Large LCD Alpha Speed & Tachometer
・Medium LCD Alpha Tachometer & Thermometer
・Electric tachometer (Blue LED / Black & Green / White & Black)
HONDA PCX160 (KF47-1000001-)
HONDA PCX (JK05-1000001-)
HONDA MSX125SF
HONDA MSX125 (MLHJC6181D5000001-)
KAWASAKI KLX125
HONDA GROM (JC75-1000001-)
Speichern für später
DAYTONA Aluminium-Knüppel-Öleinfülldeckel Typ BULLETMODELL: 98399Punkt: 63 pt7.68 EUR9.8 EURsparen ~2.12 EUR ( Bis zu 22% )
5.0 (9 Bewertungen)
Size: M20 x P2.5
Material: Machined aluminum
Hexagonal Wrench Size Used: 8mm
Specifications: With anti-rotation wire fixing hole
Included: O-ring
DUCATI 1299PANIGALE 16-18
DUCATI 1299PANIGALE R 16-18
DUCATI 1299PANIGALE S 16-18
DUCATI 848 10-13
DUCATI 848 EVO 10-13
HONDA CB1300SF 98-01
Speichern für später
YOSHIMURA Öleinfülldeckel Typ-FB[Lieferbar ca. Anfang August 2021].MODELL: 229-020-9M00Punkt: 173 pt21.14~ EUR
5.0 (6 Bewertungen)
[Size] M20xP2.5mm
[Specifications] 2 wiring holes
HONDA FORZA 21-23 Models with a gauge on the stock cap. Since this product does not have a gauge
the factory cap is required to check the oil level.
HONDA Dax70 94 Models with a gauge on the stock cap. Since this product does not have a gauge
the stock cap is required to check the oil level.
HONDA Cross Cub 50 18-22 Car models with a gauge on the stock cap. Since this product does not have a gauge
the factory cap is required to check the oil level.
Speichern für später
KITACO Reparatur / Optionale Teile] UNI-Filter-KitMODELL: 515-1300100Punkt: 374 pt45.84 EUR49.01 EURsparen 3.17 EUR ( 6% )
5.0 (10 Bewertungen)

UNI Filter for repair
[Filter Size] ApertureΦ35 x Length 78mm x Width 61mm
[Components]
・Intake air temperature sensor nipple
・Intake Air Temperature Sensor Extension Harness
・Stainless steel band
・Crescent Clamp
HONDA MONKEY125 All JB02 models
Speichern für später
SP TAKEGAWA LeistungsfilterMODELL: 03-01-0009Punkt: 305 pt37.4 EUR39.33 EURsparen 1.93 EUR ( 5% )
5.0 (29 Bewertungen)
HONDA MONKEY125 (JB03-1000001-)
HONDA MONKEY125 (JB02-1000001-)
HONDA MONKEY125 Tie model(MLHJB02)
HONDA MONKEY125 (JB05-1000001-)
Speichern für später
SP TAKEGAWA Kompakter KühlbausatzMODELL: 07-07-0421Punkt: 2063 pt252.79~ EUR265.59 EURsparen ~32.11 EUR ( Bis zu 5% )
[Specification]
・Oil cooler installation location: Under the cylinder head (by installing the special mounting bracket)
・Oil outlet: Oil filter part of stock clutch cover (by installing special oil filter cover)
HONDA GROM (JC92-1000001 or later)
HONDA MSX GROM (MLHJC92)
HONDA MONKEY125 (JB03-1000001 or later) *Normal muffler and SP Takekawa sports muffler cannot be installed.
HONDA SUPER CUBC125 (JA58-1000001 or later) *For vehicles equipped with SP Mukawa muffler
HONDA SUPER CUB110 (JA59-1000001 or later) *For vehicles equipped with SP Mukawa muffler
Speichern für später
SP TAKEGAWA eStage N-15 Aufbohrungs-Kit 143ccMODELL: 01-05-0381Punkt: 1724 pt211.27 EUR221.62 EURsparen 10.35 EUR ( 5% )
5.0 (2 Bewertungen)
Color: Silver paint
Cast pistons
Bore Diameter: 56mm
Compression ratio: 11.2: 1
Stroke: 57.9mm (Stock)
HONDA MONKEY125 (JB02-1000001-)
HONDA MONKEY125 (Thai Model | MLHJB02)

4.5 ( 39 Bewertungen )

Top Produkte
Kundenbewertungen

Mehr sehen

Produktdetails.

YOSHIMURA Satz Service-Lochstopfen

I missed out on the original service hole plug set from yoshimura! I'm glad they made a new version. The nut size on the main plug is the same as the nut on the end of the crankshaft which is rea...
Weiterlesen
Produktdetails.

YOSHIMURA Satz Service-Lochstopfen

This was a five minute job from unpacking the plug set to finish,as always the package is extremely well packaged inside from being damaged.I used the oem rubber seals from the original plugs and...
Weiterlesen
Produktdetails.

YOSHIMURA Satz Service-Lochstopfen

I needed these plugs to finish the details around the engine. They perfectly replace the original ones. Quality aluminum, laser engraved. Yoshimura obliges.
Weiterlesen
Produktdetails.

YOSHIMURA Motorgehäuse-Schutzvorrichtung Kurbelgehäuseabdeckung

Perfect for replacing the original plastic housing and beautifying the engine. Quality aluminum. Yoshimura obliges.
Weiterlesen
Produktdetails.

YOSHIMURA Öleinfülldeckel Typ-FB[Lieferbar ca. Anfang August 2021].

Perfect to replace the original plastic cap. You will need a tool to open and close it. Quality aluminum. Yoshimura obliges.
Weiterlesen
Produktdetails.

YOSHIMURA Seitliche Kopfabdeckung aus Aluminium

I absolutely wanted this piece, and I'm really not disappointed! It is very discreet and you don't necessarily see it at first glance, but connoisseurs will see that it is a magnificent piece. Th...
Weiterlesen
Produktdetails.

YOSHIMURA Öleinfülldeckel Typ-FB[Lieferbar ca. Anfang August 2021].

Item arrived... quality built Is good...colour red..nice...took a while to arrive due to no stocks, overall very satisfying..never been disappointing..thank you team webike..more to come.
Weiterlesen
Produktdetails.

YOSHIMURA US YOSHIMURA Öleinfüllstopfen

About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a dark gray anodized finish. About the fe...
Weiterlesen
Produktdetails.

YOSHIMURA Aluminium-Motorgehäuseschutz KIT Kurbelgehäuseabdeckung [PRO SHI

About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a black anodized finish. About the feelin...
Weiterlesen
Produktdetails.

YOSHIMURA Motorgehäuse-Schutzvorrichtung Kurbelgehäuseabdeckung 'PRO SHIEL

저의 몽키125는 요시무라 파츠들이 많습니다. 이 제품은 선택의 앞서 가격에 대한 부담이 많았었습니다. 하지만 주문을 하고 배송 받아 봤을땐 비싼가격이 아니란 것을 알았습니다. 묵직하고 너무 섬세하고 멋있었습니다. 파츠를 달아보니 가슴이 웅장해집니다. I GOT THE POWER!
Weiterlesen


Zündungsteile(21)	Motorkühler / Ölkühler(47) 4.8	Motor (324) 4.7
Alle Produkte	Alle Produkte	Alle Produkte


Einlass-Teile(55)	Kraftstoff Zubehör(2)
Alle Produkte	Alle Produkte

HONDA Monkey 125 Motorteile

Kürzlich angesehene Produkte