Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU,MSVR,FIM,AMA) and required for racing,the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding,protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement.
Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products,these once quirky race bespoke products have now worked their way from the track to the road; so whether you're a professional racer,a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.
Key Features
・As used by the Moto Rapido BSB team,among others.
・ompliant with FIM racing regulations.
・Available in 5 colours (black,blue,red,orange,green).
・Fit to both clutch and brake lever side.
・Made from DuPont R Zytel TM
・Supplied with all required hardware for the bespoke and racing bar applications.
The R&G moulded Lever Guard kit can be fitted to either the brake or clutch sides and has been specifically designed for the Kawasaki Z650 17- and Ninja 650 17 models and is available in a range of colour options.
[Referenzübersetzung]
Ursprünglich für die Moto2 konzipiert, wird sie heute an praktisch jeder Motorradkarosserie der Welt eingesetzt (ACU, MSVR, FIM, AMA), und der für den Rennsport erforderliche "Hebelschutz" ist der gleiche wie für geschlossene Vorderradbremsen/Radrennen (vor versehentlichem Kontakt mit anderen Motorrädern und Fahrern). ), kann es in gleicher Weise auf der Straße angewendet werden und schützt den Hebel vor Spiegelschlägen auf den Flügel während der Filterung.. Könnte dazu führen, dass die Bremse/Kupplung wieder einrastet..
Einfach zu installieren (Montage wie beim R&G Bar End Slider) dauert nur wenige Sekunden. Das spezielle Design kombiniert ultra-starke und leichte Eigenschaften mit einer Konstruktion, die einen rennzugelassenen Schutz für Ihr Rennrad oder Ihren Lastwagen ermöglicht.. Wie so viele rassenspezifische Produkte sind auch diese schrulligen rassenspezifischen Produkte jetzt abseits der Rennstrecke und auf der Straße!. Egal, ob Sie ein professioneller Rennfahrer, ein Liebhaber des Track Day oder einfach nur ein Straßenfahrer sind! R&G-Hebelschutzvorrichtungen müssen mit einem Zubehörteil geliefert werden.
Hauptmerkmale
Wird unter anderem vom Moto Rapido BSB-Team verwendet..
Die FIM-Rennregeln sind konform.
Erhältlich in 5 Farben (schwarz, blau, rot, orange und grün).
Installieren Sie ihn sowohl auf der Kupplungs- als auch auf der Bremshebelseite..
Hergestellt von DuPont R Zytel TM
Wird mit der gesamten Hardware geliefert, die für Sonderanfertigungen und Rennstangenanwendungen benötigt wird.
Der gegossene R&G-Hebelschutzkit kann sowohl auf der Brems- als auch auf der Kupplungsseite angebracht werden und wurde speziell für die Modelle Kawasaki Z650 17- und Ninja 650 17 entwickelt und ist in einer Reihe von Farboptionen erhältlich..
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the ’Lever Guard’ was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filtering; again potentially causing brake/clutch engagement.
Easy to install (fitting just like an R&G Bar End Slider) installation takes only seconds. The special design combines super strength and lightweight properties thanks to its injection moulded design allowing race approved protection for your road or track bikes. Like so many race oriented products, these once quirky race bespoke products have now worked their way from the track to the road; so whether you’re a professional racer, a track day enthusiast or simply a road rider! An R&G Lever Guard is a must have accessory.
Key Features
・As used by the Moto Rapido BSB team, among others.
・In the event of a problem with the FIM racing regulations.
・Available in 5 colors (black, blue, red, orange, green).
・Fit to both clutch and brake lever side.
・Made from DuPont R Zytel TM
・Supplied with all required hardware for bespoke and racing bar applications.
The R&G moulded Lever Guard kit can be fitted to either the brake or clutch sides and has been specifically designed for the Kawasaki Z650 17- and Ninja 650 17 models and is available in a range of colour options.
[Translation]
Originally conceived in Moto2, but adopted by almost every motorcycle body in the world (ACU, MSVR, FIM, AMA), the "lever guard" is necessary for racing, front brake / wheel racing when closed wheel (from accidental contact with other motorcycles or riders ), but can equally be applied to road riding, protecting the levers from wing mirror strikes during filtering.May cause the brake / clutch to engage again.
Easy to install (fitting like the R&G Bar End Slider) only takes a few seconds.The special design combines ultra-strength and lightweight properties with a design that allows for race-approved protection for your road bike or track.As with so many race oriented products, these quirky race bespoke products are now going way off the track.Whether you're a professional racer, a track day enthusiast or just a street rider! R&G lever guard requires accessories.
Main Features
・It is used by the Moto Rapido BSB team and others.
・FIM Racing Ruleompliant
・Available in 5 colors (black, blue, red, orange, green).
・Install on both the clutch lever side and the brake lever side.
・Made by DuPont R Zytel TM
・Custom made and comes with all the hardware needed for racing bar applications.
The R&G moulded lever guard kit can be fitted on either the brake or clutch side and has been specifically designed for the Kawasaki Z650 17- and Ninja 650 17- models and is available in a range of colour options.